FB Submersible electropump – FB4-6019 FB 4'' 3~400V

FB Submersible electropump – FB4-6019 FB 4'' 3~400V

4'' FB Submersible electropump for clean water for 4'' wells - FB FB4-6019 - Motor: 4B5.5 - 3~400V 5.5HP - DN100 - Maximum Flow Rate 260 l/min - H(m) 37 - Stainless steel

4” submersible pumps, range FB4, are for clean water for 4” wells DN 100.


The extraordinary simplicity in the construction, the performances given from anti wear floating impellers and the easy installation guarantee a high quality product, long-lasting in the time.


APPLICATIONS:
- irrigation
- water supply system
- pressure boosting
- fire-fighting systems


CONSTRUCTION:
- micro-cast stainless steel AISI 304 upper and lower support
- micro-cast stainless steel AISI 304 delivery bowl
- stainless steel AISI 304 non return valve
- stainless steel AISI 304 external sleeve
- stainless steel AISI 304 shaft
- stainless steel AISI 304 cable cover


FEATURES:
- maximum capacity: 400 l/m
- maximum head: 392 meters
- maximum power: 7,5 Kw
- maximum encumbrance diameter: 98 mm (cable cover included)
- maximum water temperature: 35°C (only for the pump, for the motor see motors’ catalogue)
- maximum sand content: 150 g/m3

 

 

» Pump data sheet - Dimensions and weights – Performance curve


» Motor data sheet


 » Cutaway pump

 


FB FB4-60 Pump

FB FB4 Impeller

 

 

MOTOR CHARACTERISTICS:

 

4” high-yield rewindable oil filled submersible motors in AISI 304.

 

The use of high-quality materials highlights the electrical and mechanical properties of the motors.

 

The stator, 24-slot lamination made, has been thought to obtain maximum electrical performance and it is hermetically sealed.

 

The winding, asynchronous type, studied to work perfectly also with inverter “Inverter Resistant” type.


The external sleeve and bottom cover are in stainless steel AISI 304 to avoid the corrosion when these parts are in contact with the water.


The upper support, G25 cast iron with electrophoresis treatment and
protected by a stainless steel top cover.


The upper and lower ball bearings, duly oversized to assure long
life to the motors.


The rotor shaft, carbon-steel alloy in the rotor area. The protrusion is in stainless steel AISI 304 up to 3 hp; from 4 hp to 10 hp it is in stainless steel DUPLEX that guarantees an excellent mechanical resistance, which is absolutely necessary with very high starting torque.

 

The mechanical seal is in graphite/ceramic. The particular form of the lodging of the mechanical seal guarantees higher seal to the motor.


The cable (approved KTW, ACS, WRAS) is equipped with a special connection plug studied to avoid the climb of the oil along the cable during the operation, besides the connection plug allows an easier substitution of the cable in case a longer one is needed.


The oil inside the motor is food-tested and it is in compliance with the prescription of the Italian Pharmacopeia and approved from the Food and Drug Administration (U.S.A.).

 

€709.58

Free shipping

Cannoli Online