FB 10F-125XDC/4 Motore sommerso 10'' Y/D 400V/690V - Duplex

FB 10F-125XDC/4 Motore sommerso 10'' Y/D 400V/690V - Duplex

10'' FB Rewindable water filled Duplex Stainless steel submersible motor - 10F125XDC/4 - 125.0HP Y/D 400V/690V 190.0A 50Hz - Star / Delta Start - PE2 + PA Winding - 4 Poles 1450Rpm

A series of high-yield rewindable water filled stainless steel AISI 316 and DUPLEX submersible motors, oversized and extraordinarily simple to maintain.


They are completely “MADE IN ITALY”, NEMA standard and made to meet environmental provisions.


This motors are thought to be installed in the most aggressive conditions like:


• sea waters
• drinking water
• brackish waters
• thermal and sulphureous waters
• desalinisation and osmosis
• aggressive and corrosive waters
• different sectors of the industry: such as food, petrochemical, steel and shipbuilding
• hard applications: mine

 

FEATURES OF THE PRODUCT IN STAINLESS STEEL DUPLEX:

 
The thrust bearing, the real heart of the submersible motor, is of “Michell” bidirectional type with pads in treated steel and supported by a disk in resin compound fibres and self-lubricating additives, fully ecological.

 

The union between these materials withstands impacts and exceptional axial thrusts for greater efficiency and safety.


The supports, upper and lower are in stainless steel DUPLEX in compliance with W.Nr.1.4469 and ASTM A 890 CE8MN rules, this type of steel allows the motor to work properly even if it is dip in the most aggressive and corrosive waters.


The stator is covered by a sheet in stainless steel DUPLEX (W.Nr.1.4462) that withstands corrosive attack and stray currents.


The windings, of asynchronous type, are:


• for the “F” series in copper wire with insulation in PVC;
• for the “F…C” series in copper wire with insulation in PE2 + PA, suggested for high temperatures, surges in tension and “Inverter Resistant”.


The rotor shaft is particularly strong, guided by pilot bush antiwear bearings in graphite. The terminal “ribbed” part of the shaft is in Duplex (W.Nr.1.4462) which is highly resistant to corrosive attack and mechanical stresses caused by the pump.


By grinding the entire shaft the rotor takes on a concentricity such as to ensure perfect linearity. With balancing, a shaft free from vibration is obtained.


The mechanical seal, fitted in series, “SIC-SIC” silicon-silicon carbide and ensures optimum sealing even with sandy water.


The membrane ensures the compensation for balancing the internal-external pressure of the motor.


The cable, elastomeric compound EPR type for foodstuff use, certified WRAS, ACS and KTW for drinking water.


The filler liquid, clear water with addition of propylene glycol specifically studied to safeguard primary waters. It performs the function of cooling, antioxidant and antifreeze, it ensures storage of the motor to -15°C.


The bolts and screws, simple things but not to be underrated, these are in stainless steel AISI 904L, well worked so as to avoid detachments from corrosion in the long term.

 

 

» Data sheet


» Cutaway motor

 


FB 10F Duplex stainless steel submersible motor

 

 

€24,671.61

Cannoli Online