Elentek Grinde 2/11 - 2 Pumps Control Panel
400V 25A - Elentek Grinde 2/11 - With reverse operation mode Grinde prevents the pump impeller from blocking and guarantees the cleanliness at each start Direct start - Quote on request
Control panel for grinder pumps. An extra gear for grinder pumps.
- Complete range of control panels for 1 three-phase motor DOL start from 0,37 to 15 KW
- Programmable unit with backward rotation function
- Control unit with digital inputs
- Control unit with phase sequence/failure and min-max voltage control
- Multifunction LCD with multi-meter integrated and view of the status of the system (voltage, current, power factor and alarms)
GENERAL FEATURES
- Power supply 3 ~ 50/60Hz 400V±10% ;
- Input circuits in low voltage;
- Automatic and temporized start of the motor backwards;
- Adjustable motor overload electronic control;
- Contactors in AC3;
- Auxiliaries and motor protection fuses;
- Alarm output (COM-NO-NC resistive load);
- Main switch interlocking door;
- Box in ABS IP55;
- Ambient temperature: -5/+40 °C;
- Relative humidity 50% a 40 °C (not condensed).
Programmable input:
- 2 N.O. digital input for start command;
- N.O. digital input for minimum level/pressure/stop command;
- 2 Digital input for motor clicson;
2 Buttons Automatic-0/Reset-Manual (temporary);
2 Multifunction Multilanguage display for:
- Operation parameters set-up;
- Operation limits set-up;
- Visualization parameters of operation;
- Visualization of the operation status;
- Visualization of alarms;
|
|
VOLTAGE |
MAX POWER |
CURRENT |
DIMENSIONS |
WEIGHT |
||||||
|
|
COD. |
V∼ |
KW |
HP |
RANGE (A) |
MAX (A) |
H |
L |
W |
Material |
Kg |
|
GRINDE 2/7.5 |
02653 |
3∼400 |
7,5 |
10 |
0-16 |
16 |
600 |
400 |
240 |
Metallic |
15 |
|
GRINDE 2/11 |
02654 |
3∼400 |
11 |
15 |
0-25 |
25 |
600 |
400 |
240 |
Metallic |
15 |
|
GRINDE 2/15 |
02655 |
3∼400 |
15 |
20 |
0-32 |
32 |
600 |
400 |
240 |
Metallic |
15 |
Quote on request, send an
