Dreno GT 50-2/110 C.150 Grinder submersible pump

Dreno GT 50-2/110 C.150 Grinder submersible pump

Grinder submersible electropump with cutting system - Dreno GT 50-2/110 C.150 - 400V 1.5HP - Horizontal outlet G 2'' - Free passage 6 mm

Application
The G2 poles Series have an inbuilt macerator in the inlet. This breaks down solids in waste water which permits transport along relatively narrow, often pre-existing, pipes.


Applications: domestic sewage, liquids with suspended solids, whenever high pressure (Hm) is
needed.


Characteristic
The main components are fabricated in cast iron GG20 In the standard configuration a lip seal in oil chamber, is fitted to the motor side, and a mechanical seal to the impeller side.


Motor range
• Squirrel cage motor at 2 poles
• Thermal protection T1 and T2 embedded in the motor winding (to be wired to the three pole contactor in the control panel)
• Class F insulation (155°C)
• IP 68 protection


Motor cooling
The cooling of the motor is ensured by the liquid where the pump is submerged.


Limits of use
• Max. permissible liquid temperature: 40°C with pump fully submerged
• On request, special version (excluded ATEX) to withstand liquid temperature up to 60°C with pump fully submerged, no S1 service
• Maximum depth of immersion: 20 MT.
• Permissible pH value: 6-10
• Hydraulic features suitable for liquids with density <1,1 kg/dm3
• Allowed voltage: 230V/400V ±5%
• Allowed frequency: 50Hz ±2%

 

 

» Pump Selector Dreno – Calculate the pump that suits your needs

 

» Technical sheet

 

 

Dreno G2

€829.25

online price Buy Dreno GT 50-2/110 C.150 Grinder submersible pump at THE BEST PRICE!
Order now! Online Shop

Free shipping

Cannoli Online