FB Submersible pump - FB10RB/9A 10'' - Cast Iron
10'' radial cast iron submersible pump for clean water - DN250 - Maximum Flow Rate 2167 l/min - H(m) 144 - Motor to be added: recommended FB 10F125 3~400 (125 HP – 92 kW) or compatible
PRODUCT CODE: FB10RB/9AFB radial-flow submersible pump end, FB10R series, in cast iron, for clean water in 10” wells (DN 250). The stages with limited axial size provide high heads with medium-low flow rates.
Cast iron impellers make the range robust and suitable for deep wells, with the highest safety of the installation and high efficiency.
APPLICATIONS
- agriculture
- fire fighting
- water supply
- pressure boosting
- industry
- irrigation
CONSTRUCTION
- valve casing, discharge casing, stage casings and impellers in EN-GJL-250 cast iron
- journal sleeves, wear rings and spacer sleeves in ASTM B148 bronze
- shaft bush in AISI 420 stainless steel
- valve wing, cable guard and bolts in AISI 304 stainless steel, NBR valve seat
FB10R SERIES FEATURES
- maximum flow rate: 2167 l/min
- maximum head: 649 m
- maximum power: 150 kW
- maximum overall diameter: 242 mm (cable guard included)
- maximum water temperature: 60°C (pump end only; for the motor see the motor page)
- maximum sand content: 30 g/m³
ON REQUEST
- GCuSn10 (B10) bronze impellers
- AISI 316 stainless steel impellers
TECHNICAL DATA
- Motor power to couple: 125 HP – 92 kW
- Recommended motor: FB 10F125 – three-phase 400 V, direct start
- Flow rate: 833 – 2167 l/min
- Head: 144 – 300 m (329 m at zero flow)
- Discharge outlet: DN 100
- Maximum diameter: 242 mm
- Pump end length: 1320 mm
- Pump end weight: 154 kg
- Speed: 2900 rpm
PERFORMANCE
| Flow rate l/min | Flow rate m³/h | Flow rate l/s | Head m |
|---|---|---|---|
| 0 | 0 | 0 | 329 |
| 833 | 50 | 13.9 | 300 |
| 1000 | 60 | 16.7 | 292 |
| 1167 | 70 | 19.5 | 282 |
| 1333 | 80 | 22.2 | 269 |
| 1500 | 90 | 25 | 252 |
| 1667 | 100 | 27.8 | 231 |
| 1833 | 110 | 30.6 | 207 |
| 2000 | 120 | 33.3 | 178 |
| 2167 | 130 | 36.1 | 144 |
Tolerances according to EN ISO 9906 annex A gr. 2. Complies with EU Reg. 547/2012 (MEI ≥ 0.40).
PERFORMANCE CURVE
Curve drawn from FB catalogue data.
Price refers to the pump end only: motor, coupling and cables not included.
PUMP END WITHOUT MOTOR
To run the pump you need a 10” submersible motor of 125 HP (92 kW), to be purchased separately. Below you will find the recommended motor and all compatible motors.
RECOMMENDED MOTOR
FB 10F125 – three-phase 400 V, direct start: 10” submersible motor, cast iron, PVC winding, 125 HP – 92 kW.
COMPATIBLE MOTORS (125 HP – 92 kW)
Cast iron, PVC winding
standard cast iron motor, rewindable, water filled, 2 poles 2900 rpm
- FB 10F125 – three-phase 400 V, direct start
- FB 10F125 – star-delta 400/690 V (requires a Y/Δ control panel and 6-core cable)
Cast iron, PE2+PA winding
PE2+PA insulation: suggested for high temperatures, voltage surges and inverter use
- FB 10F125C – three-phase 400 V, direct start
- FB 10F125C – star-delta 400/690 V (requires a Y/Δ control panel and 6-core cable)
Cast iron, high temperature
for hot water up to 70°C
- FB 10F125H – three-phase 400 V, direct start
- FB 10F125H – star-delta 400/690 V (requires a Y/Δ control panel and 6-core cable)
AISI 316 stainless steel, PVC winding
for aggressive or chloride-rich water
- FB 10F125X – three-phase 400 V, direct start
- FB 10F125X – star-delta 400/690 V (requires a Y/Δ control panel and 6-core cable)
AISI 316 stainless steel, PE2+PA winding
PE2+PA insulation: suggested for high temperatures, voltage surges and inverter use
- FB 10F125XC – three-phase 400 V, direct start
- FB 10F125XC – star-delta 400/690 V (requires a Y/Δ control panel and 6-core cable)
AISI 316 stainless steel, high temperature
for hot water up to 70°C
- FB 10F125XH – three-phase 400 V, direct start
- FB 10F125XH – star-delta 400/690 V (requires a Y/Δ control panel and 6-core cable)
AISI 904L stainless steel, PVC winding
for very aggressive, brackish or sea water
- FB 10F125X904 – three-phase 400 V, direct start
- FB 10F125X904 – star-delta 400/690 V (requires a Y/Δ control panel and 6-core cable)
AISI 904L stainless steel, PE2+PA winding
PE2+PA insulation: suggested for high temperatures, voltage surges and inverter use
- FB 10F125X904C – three-phase 400 V, direct start
- FB 10F125X904C – star-delta 400/690 V (requires a Y/Δ control panel and 6-core cable)
AISI 904L stainless steel, high temperature
for hot water up to 70°C
- FB 10F125X904H – three-phase 400 V, direct start
- FB 10F125X904H – star-delta 400/690 V (requires a Y/Δ control panel and 6-core cable)
Not sure this is the right pump for your system?
Answer a few questions, no technical data needed: one of our technicians will email you the right pump and its control panel, free and with no obligation. Try the configurator ›
Online sale Order now!
Free shipping
