Pump configurator: the right pump for your system
Termoverde pump configurator
The right pump for your system, chosen by our technical department. Free and with no obligation.
| 1 Press the Pump configurator button: the chat opens. |
2 Answer the assistant's questions: if you don't know a value, write I don't know. |
3 Want another language? Type “pump configurator” in your language. |
A water pump chosen only by motor power is almost always wrong: too small and water won't reach the highest taps, too big and it uses more energy, keeps switching on and off and wears out early. The Termoverde pump configurator asks you a few plain-language questions and our technical department turns your answers into a real sizing: pump, control panel and electrical protections, with prices and availability.
How to choose a pump: the four values that matter
| Flow rate How much water it must move, in litres per minute or m³/h: it depends on how many outlets run at the same time. |
Head The total height to overcome: elevation difference, pipe friction losses and the pressure you want at the outlet. |
| Power supply Single-phase 230 V, three-phase 400 V or no mains at all: then you need an engine-driven pump. |
Liquid and system Clean, sandy, dirty or brackish water, wine, diesel; well, tank, floors and bathrooms. |
Rule of thumb: 1 bar equals about 10 metres of head. To get 3 bar at the taps you need about 30 metres on top of the elevation difference: one of the sums we do for you.
Pumps you can configure
Submersible well pumps4", 6" and larger, single- or three-phase; AISI 304 or 316 stainless steel for sandy or aggressive water. |
Booster setsConstant pressure at home and in apartment buildings; with an inverter, lower consumption and noise. |
Irrigation pumpsCentrifugal, self-priming and multistage pumps for vegetable gardens, gardens, orchards and fields. |
Drainage and wastewaterFor clear, dirty and sewage water, with grinder or complete lifting stations. |
Engine-driven pumpsPetrol or diesel, to irrigate, transfer or empty where there is no electricity. |
Transfer and positive-displacementFor wine, oil, diesel and viscous liquids, also reversible. |
CirculatorsHeating, solar thermal and domestic hot water recirculation. |
Swimming-pool pumpsChosen on pool volume, filter and position relative to the water. |
Dosing pumpsChlorine, pH and fertilisers: constant, proportional or automatic dosing. |
Marine pumps12 V, 24 V or 230 V, according to the function on board and the liquid. |
Control panel and protections
Even a well-chosen pump fails early if it is not properly controlled and protected. That is why the proposal always includes the right control panel:
✔ Correct starting: direct, star-delta, soft start or inverter depending on the power.
✔ Dry running: float switches, probes or electronic control stop the pump when water runs out.
✔ Motor protection: against overload, phase loss and voltage swings.
✔ Automation: pressure switches, flow switches, multi-pump panels with alternation and alarms.
Why ask the Termoverde technical department
✔ Real duty point: the pump is chosen on its curves, not on the maximum values on the label.
✔ Complete system: pump, panel, protections and accessories that work together.
✔ Alternatives explained: next to the main solution, an alternative with the differences made clear.
✔ Quick replacements: with the brand and model of your current pump we find the spare or an equivalent.
✔ In your language: write as you prefer; we ship across Italy and abroad.
Pump configurator FAQ
How much does it cost?
Nothing: the configurator and the technical department's proposal are free and with no obligation.
What if I don't know some values?
Answer I don't know: we use a safe value and, if it is decisive, the technician will ask you.
Can I replace a pump I already have?
Yes: write the brand and model on the nameplate and we find the same model or an equivalent.
What is the difference between flow rate and head?
Flow rate is the water moved over time, head is the height overcome: more head means less flow.
Submersible or surface pump?
A surface pump can lift water from about 7 metres; deeper than that you need a submersible.
Will I also get the control panel?
Yes: the proposal includes the panel and protections suited to the pump and the system.
Find the right pump now
Describe your system in the chat: the Termoverde technical department will email you pump, panel and protections, usually within a few working hours.





