Injecta CD.IND 1S inductive conductivity probe

The CD IND series of inductive sensors was engineered and developed to produce an electrode that was very high performing, but at the same time competitive.

The result was obtained by molding the sensor in propylene loaded with glass fiber.

This sensor offers all the advantages of the inductive conductivity measurement method, including the absence of passivation of conventional conductivity electrodes.

All CD IND series sensors are temperature compensated and are also designed for in-line, immersion or tank installation.

• TEMPERATURE TEMPERATURES: -5 to 60 °C (without freezing
• CONTACT MATERIAL CONTACT MATERIAL: glass-reinforced polypropyleneglass-reinforced polypropylene
• TEMPERATURE COMPENSATION TEMP: PT1000 wires
• CABLE: Standard 5 metres
• CONNECTION: 1⁄2" BSP male
• PROTECTION DEGREE: IP67
• MATERIAL: PVC with Viton seals
• OPERATING TEMPERATURE: -5 to 60 °C (without freezing)
• IMMERSION LENGTH: 600 or 1200 mm
• MOUNTING: Standard bracket or optional flange
• WORKING PRESSURE: from vacuum to 6.5 bar (100 psi)
• CONDUCTIVITY SCALE: 1000 μS at 1 Simens
• RESOLUTION: 100 μS to 1000 μS