Injecta Nexus NX.6500 Q-TB/OX
Injecta Nexus NX.6500 Q-TB/OX - Measuring instrument for dosing pumps - Panel version - 0÷20 ppm / 0÷1/0÷10/0÷40 FTU/NTU / TEMP - 100/240 vac 50/60hz 10W
TOOLS FOR PROCESS ANALYSIS
● DISPLAY OF SIMULTANEOUS MEASUREMENT VALUES (NUMERICAL and BARGRAPH) and TEMPERATURE
● SCROLLING OUTPUT VALUES
● GRAPHIC ICONS FOR: STATUS OF DIGITAL OUTPUTS, WASHING CYCLE, DATA RECORDING, ALARMS
● POSSIBILITY TO SEE ONLY THE MEASUREMENT IN LARGE SIZE
● DATA RECORDING
● INTERNAL FLASH MEMORY 4 Mbit (approximately 16,000 RECORDINGS)
● RECORDING INTERVAL: 1÷99 min
● TYPE: CIRCULAR (F.I.F.O.) or FILLING
● POSSIBILITY TO VIEW THE RECORDED DATA IN TABLE AND GRAPHIC FORMAT, WITH INDICATION OF MAXIMUM, MINIMUM AND AVERAGE VALUES OF THE SELECTED PERIODS
● PID REGULATION
● P - PI - PID FUNCTIONS ACTIVATED ON THE ANALOGUE OR DIGITAL OUTPUT
● PROPORTIONAL RANGE: 0÷500%
● INTEGRAL TIME: 0:00÷5:00 min
● DERIVATIVE TIME: 0:00÷5:00 min
● 2 ANALOGUE OUTPUTS
● OUTPUT 1 PROGRAMMABLE FOR MEASUREMENT
● OUTPUT 2 PROGRAMMABLE FOR MEASUREMENT / TEMPERATURE / PID REGULATION
● THE LIMITS OF THE OUTPUTS ARE FREELY PROGRAMMABLE WITHIN THE MEASUREMENT RANGE
● 4 DIGITAL OUTPUTS
● ON/OFF SET POINT: PROGRAMMING OF THE OPERATING RANGE (HYSTERESIS/DIRECTION) AND START/STOP TIME 000÷999 SEC.
● PID REGULATION: PULSES, FREQUENCY or PWM (2 SET POINTS)
● PROGRAMMABLE ALARM FOR: INSTRUMENT ANOMALIES, MINIMUM, MAXIMUM, SET POINT DELAY, Dwell TIME (LIVE CHECK)
● DELAY TIME: 00:00÷59:99 mm:ss WITH MINIMUM INTERVAL OF 15 sec.
● PERMANENT TIME 00:00÷99:999 hh:mm
● SET POINT DEACTIVATION (IN CASE OF ALARM): ENABLE/DISABLE
● WASHING ELECTRODES
● PROGRAMMING OF THE INTERVAL (MINIMUM 15 min) AND DURATION
● DURING WASHING, ALL ANALOGUE AND DIGITAL OUTPUTS ARE FREEZED
● DIGITAL INPUT
● FOR DISABLING DOSAGES
● RS485 SERIAL PORT
● FOR REMOTE SET UP AND REAL TIME ACQUISITION OR TO DOWNLOAD DATA (VIA DEDICATED SOFTWARE)
● MODBUS RTU COMMUNICATION PROTOCOL
● USB PORT
● USB FOR DIRECT DOWNLOAD ON PEN DRIVE (OPTIONAL)
● MANUAL CONTROLS
● POSSIBILITY OF SIMULATING ANALOGUE AND DIGITAL OUTPUTS FROM THE KEYBOARD
● TEMPERATURE COMPENSATION
● VIA PT100 SENSOR WITH 3 OR 4 WIRE, OR PT1000
● FRAMEWORK VERSION
● 96x96x133 mm
● 100/240 vac 50/60hz
● 100/240 vac 50/60hz 10W
Free shipping