Speroni VS20-5 X3+QD+INV/EASY Booster set

BOOSTER SET WITH INVERTER
Speroni booster set with 2 vertical multistage pumps VS 32-4, each controlled by its own EASY inverter. The inverter keeps the system pressure constant as water demand changes by adjusting the speed of the pumps; it is easy to install and adjust. High-efficiency IE3 motors. Minimum efficiency index (BEP) MEI ≥ 0.4.

APPLICATIONS
- Water supply by suction from wells
- Pressure boosting from a water distribution network

SUPPLIED EQUIPMENT
- 2 vertical multistage pumps
- 2 EASY inverters
- Base with anti-vibration mounts
- Suction and delivery manifolds
- Ball valves
- Non-return valves
- Diaphragm tanks
- Pressure gauges and pressure sensors
- Control panel with disconnect switches

TECHNICAL DATA
- Pumps: 2 × Speroni VS 32-4
- Power: 7.5 + 7.5 kW (10.0 + 10.0 HP)
- Power supply: 400V three-phase 50 Hz
- Nominal flow rate: 32 + 32 m³/h
- Head: 49 m
- Suction manifold (DNA): DN65 2½"
- Delivery manifold (DNM): DN65 2½"
- Motor efficiency: IE3

LIMITS OF USE OF THE PUMPS
- Liquid temperature up to 35°C (for domestic use according to EN 60335-2-41)
- Max. liquid temperature 110°C (for other uses)
- Ambient temperature up to 40°C
- Continuous duty
- Clean water

MOTOR
- 2-pole induction electric motor (n = 2900 min-1)
- Insulation class F
- IP 55 protection

PUMP MATERIALS
- Suction and delivery bodies: AISI 304 stainless steel
- Impellers: AISI 304 stainless steel
- Sleeve: AISI 304 stainless steel
- Covers: AISI 304 stainless steel
- Motor shaft: AISI 304 stainless steel
- Mechanical seal: Silicon/Silicon/Viton

Not sure this is the right pump for your system?

Answer a few questions, no technical data needed: one of our technicians will email you the right pump and its control panel, free and with no obligation. Try the configurator ›