Speroni SFC 800/S Drainage pump

APPLICATIONS
Portable submersible drainage pump with a non-return valve on the lower inlet, preventing water from flowing back into the pipe, and suction down to 1 mm. Its small outside diameter allows use in 8" wells. Water drawn in from the bottom flows between the motor casing and the outer jacket before leaving from the top, cooling the motor and allowing continuous operation even at low water levels. The wide clearance between the semi-open impeller and the pump body prevents clogging with mud or sand.

LIMITS OF USE
- Liquid temperature up to 35°C (domestic use according to EN 60335-2-41)
- Max. liquid temperature 35°C (other uses)
- Maximum immersion depth 5 m
- Minimum suction level 1 mm

MOTOR
- Single-phase 230V 50Hz
- Built-in automatic reset overload protection
- Permanent capacitor fitted
- Insulation class F
- IP 68 protection

MATERIALS
- Pump body: Die-cast aluminium
- Impeller: Cast iron
- Motor casing: Die-cast aluminium
- Diffuser: NBR
- Motor shaft: AISI 420 stainless steel
- Double mechanical seal in oil chamber: Ceramic/Graphite/NBR and Silicon/Silicon/NBR

TECHNICAL DATA Speroni SFC 800/S
- Power supply: single-phase 230V 50Hz
- Rated power: 1 HP (0.75 kW)
- Power input P1: 1.1 kW
- Max. flow rate: 300 l/min
- Max. head: 15.5 m
- Delivery port: 2"
- Weight: 16 kg

Not sure this is the right pump for your system?

Answer a few questions, no technical data needed: one of our technicians will email you the right pump and its control panel, free and with no obligation. Try the configurator ›