Speroni SBM 500/S Drainage pump

APPLICATIONS
Portable submersible electric pumps with automatic operation, highly efficient and ideal for continuous use even at low water levels. The NBR-protected hydraulic part ensures greater corrosion resistance and the small outside diameter allows use in 8" wells. Used to remove seepage water, empty flooded rooms and tanks and drain clean or slightly dirty waste water.

LIMITS OF USE
- Liquid temperature up to 35°C (domestic use according to EN 60335-2-41)
- Max. liquid temperature 35°C (other uses)
- Maximum immersion depth 5 m
- Minimum suction level 50 mm

MOTOR
- Single-phase 230V 50Hz with float switch
- Built-in automatic reset overload protection
- Permanent capacitor fitted
- Insulation class F
- IP 68 protection

MATERIALS
- Pump body: Die-cast aluminium
- Impeller: Cast iron
- Motor casing: Die-cast aluminium
- Diffuser: NBR
- Motor shaft: AISI 420 stainless steel
- Double mechanical seal in oil chamber: Ceramic/Graphite/NBR and Silicon/Silicon/NBR

TECHNICAL DATA Speroni SBM 500/S
- Power supply: single-phase 230V 50Hz
- Rated power: 0.65 HP (0.48 kW)
- Power input P1: 0.65 kW
- Max. flow rate: 240 l/min
- Max. head: 11.5 m
- Delivery port: 2"
- Weight: 14 kg

Not sure this is the right pump for your system?

Answer a few questions, no technical data needed: one of our technicians will email you the right pump and its control panel, free and with no obligation. Try the configurator ›