Honda F560 K7 C - 3,6 KW Motor Hoe

Agricultural machine mainly used for large areas of land or large gardens that require maintenance.

It is a made in Italy machine, versatile, powerful, robust, intelligent and easy to use.

The handlebar can be adjusted in three different angles and according to the height of the operator for greater maneuverability and control of the vehicle without further effort.

The main clutch engages and disengages power from the engine to the transmission.

The handlebar side clutches are used to steer left or right.

The transmission is of the 3 forward and 1 reverse gear type while the PTO shaft is used for stationary work such as spraying, towing, etc.

With this tiller you can adjust the hoeing depth in a really simple and fast way: just loosen the locking bolts that secure the bars and slide them up or down as needed.

The pneumatic wheels are 4.00-7 and their pressure must be 118 kPa. It is important to check the pressure of the wheels before each use because if they are deflated or slightly inflated, they reduce the load capacity of the vehicle.

The motor hoe is equipped with the 163 cm3 Honda GX 160 engine, also made in Italy, powerful, reliable, silent, with low and clean emissions, fueled by petrol.
At high altitudes, the carburetor's standard fuel / air mixture is too rich.
Performance decreases and fuel consumption increases. A very rich fuel mixture also dirties the spark plugs and causes difficult starting.

The correct operation of the tiller is to lower the handle so that the front part of the agricultural machine is raised by about 6/8 °.

It is also important to keep the tiller in the best conditions and carry out routine maintenance on it.