Speroni CX 32-200/5.5 Monoblock pump

APPLICATIONS
Single-impeller monoblock centrifugal electric pumps suitable for pumping clean water and other chemically and mechanically non-aggressive liquids; they can be installed in any position except with the suction port facing upwards. Together with the design, which allows the motor to be removed together with the rotating parts of the pump (back pull-out) and refitted without removing the pump body and the connected pipes, this makes them easy and convenient to use for the most varied requirements in civil, agricultural, industrial and general plant engineering applications. Water
supply, sprinkler or surface irrigation, feeding of booster sets with tank and pressure boosting, heating and air conditioning, and any other use involving the transfer of clean liquids in general.

LIMITS OF USE
- Liquid temperature up to 35°C (for domestic use
according to EN 60335-2-41)
Max. liquid temperature: 90°C (for other uses)
- Ambient temperature up to 40°C
- Manometric suction lift up to 7 m
- Continuous duty

MOTOR
- 2-pole induction motor (n = 2850 min-1)
- Insulation class F
- IP 55 protection

MATERIALS
- Pump body AISI 304 stainless steel
- Seal-holder flange AISI 304 stainless steel
- Impeller AISI 304 stainless steel
- Motor shaft AISI 304 stainless steel
- Mechanical seals Ceramic/Graphite/NBR

Manufacturer data: Speroni 2026 catalogue.

Not sure this is the right pump for your system?

Answer a few questions, no technical data needed: one of our technicians will email you the right pump and its control panel, free and with no obligation. Try the configurator ›