Speroni HGM 50-1.5 Monoblock pump

APPLICATIONS
Self-priming monoblock electric pumps with open impeller. The check valve built into the suction port prevents siphoning when the pump stops and ensures automatic re-priming: at each start the pump re-primes even if only partly filled with liquid and with the suction pipe completely empty. Used for draining clean or slightly dirty water, surface irrigation and emptying operations.

LIMITS OF USE
- Liquid temperature up to 35°C (for domestic use
according to EN 60335-2-41)
Max. liquid temperature: 90°C (for other uses)
- Ambient temperature up to 40° C
- Manometric suction lift up to 7 m
- Continuous duty

MOTOR
- 2-pole induction motor (n = 2850 min-1)
- Insulation class F
- IP 55 protection

MATERIALS
- Pump body Cast iron
- Motor bracket Cast iron
- Impeller Cast iron
- Motor shaft AISI 304 stainless steel
- Mechanical seals Ceramic/Graphite/NBR

Not sure this is the right pump for your system?

Answer a few questions, no technical data needed: one of our technicians will email you the right pump and its control panel, free and with no obligation. Try the configurator ›