Control panel configurator: the right panel for your pump

 

Termoverde control panel configurator

The right control panel for your pump, chosen by our technical department. Free and with no obligation.

1
Press the Control panel configurator button: the chat opens.		 2
Answer the assistant's questions: if you don't know a value, write I don't know.		 3
Want another language? Type “control panel configurator” in your language.

The control panel starts the pump when needed, stops it when it should and protects it against overload, lack of water and voltage swings. A wrong panel is the most common reason for burnt-out pumps or pumps that won't restart. The Termoverde control panel configurator asks you a few plain-language questions, starting from what matters most, the motor's rated current, and our technical department proposes the right panel, with accessories, prices and availability.

How to choose a control panel: the four values that matter

Rated current
The motor's amperes (A), shown on the nameplate: the protection is set on this value.		 Supply and power
Single-phase 230 V or three-phase 400 V and power in kW: they decide the panel and starting type.
Number of pumps
One, two or three pumps, alternating or with a standby pump that takes over in case of failure.		 Control
Float switch, pressure switch, level probes, pressure transducer or inverter.

Practical tip: photograph or copy the motor nameplate before you start. With current, voltage and power at hand you will answer in a few minutes.

Systems you can configure the panel for

Submersible well pumps

Panels with capacitor for single-phase pumps and dry-running protection with probes or electronic control.

Booster sets

Start and stop by pressure switch or transducer, for homes, apartment buildings and businesses.

Constant pressure with inverter

The motor runs at the speed needed: steady pressure, lower consumption, fewer water hammers.

Drainage and lifting

For clear water and sewage, with float switches and high-level alarm.

Tank filling

Automatic start and stop according to the level of the cistern or tank.

Irrigation

Panels for surface and submersible pumps, also controlled by a timer.

Two or three pumps

Alternation to wear the pumps evenly and standby in case of failure.

Alarms and remote control

Level and fault signals, with alerts and control from your phone.

Replacing a faulty panel

With the brand and model of the old panel, or of the pump, we find the equivalent.

Fire-fighting and special cases

We collect the essential data and the technician chooses the panel on the project.

Starting and protections

Every proposed panel is sized on the motor data and includes the protections needed:

✔ Direct starting: for smaller powers, simple and cost-effective.

✔ Reduced starting: star-delta, impedances or soft start for larger motors, to limit inrush current.

✔ Dry running: float switches, probes or electronic control stop the pump when water runs out.

✔ Motor protection: against overload, phase loss and out-of-range voltage.

Why ask the Termoverde technical department

✔ Set on real data: the panel is chosen on your motor's current, voltage and power.

✔ From 0.37 to over 200 kW: electromechanical and electronic panels for every power.

✔ Alternatives explained: next to the main solution, an alternative with the differences made clear.

✔ In your language: write as you prefer; we ship across Italy and abroad.

Control panel configurator FAQ

How much does it cost?

Nothing: the configurator and the technical department's proposal are free and with no obligation.

I don't know the rated current: can I still use it?

Yes: answer I don't know and write the pump's brand and model; if needed, the technician will ask for a photo of the nameplate.

Single-phase or three-phase?

The nameplate tells you: 230 V is single-phase, 400 V is three-phase. The panel must match the motor's supply.

Is a panel with inverter worth it?

Yes, if you want constant pressure and lower consumption; for simple emptying a float-switch panel is enough.

Does the panel suit pumps of any brand?

Yes: it is chosen on the motor's electrical data, not on the pump brand.

Can I replace a faulty panel?

Yes: write the brand and model of the old panel or of the pump and we find the equivalent.

Find the right control panel now

Describe your pump and system in the chat: the Termoverde technical department will email you panel and accessories, usually within a few working hours.