Elentek eJockey-EN/7.5 ABS Fire-fighting panel

GENERAL FEATURES

• Electronic control panel;
• Three-phase power supply 100-240Vac or 310-450Vac 50/60Hz;
• Contact G/P1 normally open;
• 3 inputs for single pole level sensors (COM-MIN-MAX);
• T1 input for motor clicson;
• Normally open input G.A. for alarm activation;
• AUTOMATIC-0-MANUAL buttons (spring return);
• DIP-SWITCH 1 enable of level alarm by probes;
• DIP-SWITCH 2 thermal protection delay 5/10 seconds;
• DIP-SWITCH 3 output alarm set-up;
• DIP-SWITCH 4 enable of alarm reset by motor clicson;
• DIP-SWITCH 5 emptying/filling operation;
• DIP-SWITCH 6 enable of start/stop float switches;
• DIP-SWITCH 7 enable of delay on board activation on power mains return;
• Green led power ON / phase failure/sequence;
• Green led automatic mode on;
• Green led motor active;
• Red led level alarm from probes or G.A. input;
• Red led motor overload alarm / minimum current alarm;
• Red led motor clicson activation alarm;
• Electronic control of maximum current overload, with assisted calibration;
• Electronic control of minimum current dry running, with assisted calibration;
• Automatic reset from minimum current alarm;
• Protection of auxiliary circuits and motor with fuses (COM-NO-NC resistive load - 5A / 250V);
• Cumulative live alarm output (12Vcc / 100mA);
• Main switch interlocking door;
• Box in ABS IP55;
• Ambient temperature: -5/+40 °C;
• Relative humidity 50% at 40 °C (condensate free).